dchesterton/texecom2mqtt repository overview

docker run -d -v $PWD/config.yml:/app/config.yml --name texecom2mqtt dchesterton/texecom2mqtt:latest

version: "3"
services:
    texecom2mqtt:
        container_name: texecom2mqtt
        image: dchesterton/texecom2mqtt:latest
        restart: unless-stopped
        volumes:
            - ./config.yml:/app/config.yml

texecom:
    host: 192.168.0.1 # Required: Texecom panel IP address
    udl_password: "abcdef" # Optional: UDL password programmed in the panel. Note: this is NOT the code used to arm/disarm the panel (default: 1234)
    port: 10002 # Optional: port used to connect to the panel (default: 10001)

mqtt:
    host: 192.168.1.5 # Optional: broker URL or IP address (default: localhost)
    port: 1884 # Optional: broker port (default: 1883 or 8883 for TLS connections)
    prefix: texecom2mqtt # Optional: topic prefix to use (default: texecom2mqtt)
    username: my_user # Optional: broker user (default: none)
    password: my_password # Optional: broker password (default: none)
    client_id: texecom2mqtt # Optional: client ID (default: texecom2mqtt)
    keepalive: 30 # Optional: keepalive in seconds (default: 60)
    clean: true # Optional: clean session (default: true)
    retain: true # Optional: retain (default: true)
    retain_log: false # Optional: retain on log messages (default: false)
    qos: 2 # Optional: QoS (default: 0)
    ca: /cert/ca.pem # Optional: CA for TLS connection (default: none)
    cert: /cert/cert.pem # Optional: certificate for TLS connection (default: none)
    key: /cert/key.pem # Optional: private key for TLS connection (default: none)
    reject_unauthorized: true # Optional: if not false, the server certificate is verified against the list of supplied CAs. Override with caution (default: true when using TLS)

homeassistant:
    discovery: true # Optional: enable Home Assistant discovery (default: false)
    prefix: home-assistant # Optional: Home Assistant MQTT topic prefix (default: homeassistant)

# Optional: required only if you want to override a zone name or device class
zones:
    - id: front_door # Required: zone number or ID (e.g. 'front_door' or '4')
      name: Front Door Sensor # Optional: override the zone name (default: zone name in panel)
      device_class: motion # Optional: set the Home Assistant device class for a zone (default: the app will guess based on zone name and type). See https://www.home-assistant.io/integrations/binary_sensor/#device-class for available device classes

    - id: ...
      name: ...

# Optional: required only for Home Assistant mapping
areas:
    - id: house # Required: area number or ID (e.g. 'detached_garage', '4A' or '2')
      name: House Alarm # Optional: override the area name (default: area name in panel)
      full_arm: armed_away # Optional: mappings of Texecom arm types to Home Assistant arm types (armed_away, armed_home, armed_night, armed_custom_bypass, armed_vacation), omit any which are not relevant
      part_arm_1: armed_night
      part_arm_2: armed_home
      part_arm_3: armed_custom_bypass
      code_arm_required: false # Optional: see https://www.home-assistant.io/integrations/alarm_control_panel.mqtt/#code_arm_required
      code_disarm_required: false # Optional: see https://www.home-assistant.io/integrations/alarm_control_panel.mqtt/#code_disarm_required
      code: "123456" # Optional: see https://www.home-assistant.io/integrations/alarm_control_panel.mqtt/#code
    - id: ...
      name: ...

cache: true # Optional: cache panel data instead of loading it each time. Recommended if using a larger panel and/or your data will not change (default: false)
log: debug # Optional: trace, debug, panel, info, warning or error (default: info)

{
    "name": "Front Door",
    "number": 5,
    "status": 1,
    "type": "Entry/Exit 1",
    "areas": ["A", "B", "C"]
}

{
    "id": "A",
    "name": "House Alarm",
    "number": 1,
    "status": "disarmed",
    "last_active_zone": {
        "name": "Front Door",
        "number": 1
    }
}

{
    "battery_charging_current": 36,
    "battery_voltage": 13.42,
    "panel_current": 423,
    "panel_voltage": 13.49
}

{
    "type": "ArmFailed",
    "description": "Arm Failed",
    "timestamp": "2020-01-01T00:00:00+00:00",
    "areas": ["A"],
    "parameter": 8,
    "entity": {
        "zone_id": "front_door",
        "zone_name": "Front Door"
    }
}

{
    "type": "UserCode",
    "description": "User Code",
    "timestamp": "2020-01-01T00:00:00+00:00",
    "areas": ["A", "B"],
    "parameter": 1,
    "entity": {
        "user_id": 1,
        "user_name": "Daniel"
    }
}

{
    "type": "TimeChanged",
    "description": "Time Changed",
    "timestamp": "2020-01-01T00:00:00+00:00",
    "areas": [],
    "parameter": 0
}

{
    "version": "1.0.41",
    "log_level": "debug",
    "model": "Premier Elite 48",
    "firmware_version": "V5.02.01LS1",
    "serial_number": "12345"
}